Currently Showing: All Projects
Provide assistance in preparing a construction bid package for a project to modify portions of an existing pipeline terminal facility.
Perform an audit of the process safety information (PSI) at several of the storage terminals to assess the level of compliance of these sites with the PSI requirements of OSHA’s PSM regulation, 29 CFR 1910.119, and the accident prevention Program Level 3 requirements of EPA’s RMP regulation, 40 CFR 68. Subsequently provide process safety management (PSM) compliance support to address deficiencies found in the process safety information for the various sites.
Engineering support for various operations associated with anhydrous ammonia (NH3NH3) pipeline systems which include transport lines, booster stations, hot and cold (cryogenic) storage facilities and terminal flare systems.
Develop a preliminary process design and cost estimate for consolidating several pigment manufacturing processes into one location.
Evaluate the existing controls on a chlor-alkali hydrogen system at a plastics manufacturing facility and seek to identify improvement opportunities.
Perform a high level process alternatives evaluation for options related to the treatment of wastewater at an aircraft painting facility.
Develop a conceptual process design and cost estimate for the pyrolysis gas recovery system portion of a waste tire recycling plant.
Develop a process design package (basic engineering package) for a caprolactam drying system.
Provide process design services in support of a new high-purity titanium tetrachloride (TiCl4TICL4) distillation train.
Investigate, simulate, and redesign a distillation train for series operation to purify titanium tetrachloride (TiCl4TICL4) and remove unwanted color bodies.
Evaluate/troubleshoot and subsequently re-design the back end of a used tire pyrolysis plant for the production of commercial value oil products.
Lead the process design package development effort for the finishing section of a Gas-Phase Polyethylene Plant.
Plan and lead an EPC company detail engineering team in the development of a process design package for a new polypropylene production plant.
Perform a relief device sizing study for an Isomerization Unit and associated Propane Refrigeration Skid at an independent U.S. oil refinery.
Develop process instrumentation specifications for a new crude unit revamp project.
Develop refinery process safety information for the purpose of compliance with OSHA Process Safety Management (PSM) and EPA Risk Management Program (RMP) regulations.
Provide an independent 3rd party due diligence evaluation and plant site visit of a petroleum refinery in Asia.
Develop a summary table of safe operating limits (SOLs) for each of the processing units within a U.S. based refinery.
Conduct a hydraulic study of a crude atmospheric furnace and reduce pressure drop in the furnace while maintaining throughput capacity. Also evaluate the crude supply and pre-heat train for pressure drop optimization.
Evaluate the an existing lube-oil filtration system for the Fluid Catalytic Cracking (FCC) Unit Wet Gas Compressors and provide recommendations for improving filtering efficiency and operability.
Evaluation of the existing tank farm condensate recovery system hydraulics to determine throughput capacity, existing limitations, and options for increased capacity.
Evaluation of an existing firewater system's hydraulics to determine capacity, supply pressure, and modification options to support a new refinery processing unit.
Perform an evaluation of a refinery's existing wastewater effluent system's hydraulics to determine throughput capacity and make debottlenecking recommendations.
Provide an independent engineering evaluation study of ways to reduce plant utility energy consumption for a proposed waste lubricant recycling facility.
Project management for completing the process design of replacement Butamer dryers. Also provided project oversight for mechanical and structural design and equipment installation.