Currently Showing: All Projects
Perform a 3rd party review, for a process equipment design/fabrication company, of a HYSYS simulation / material and energy balance for a carbon dioxide (CO2) compression process.
Develop an AspenPlus simulation model and other process design information for a novel alternative electricity pilot-plant unit for a technology development company.
Develop simulation models for the liquid propane refrigeration section at an LNG liquefaction facility to determine the impact to the propane compressor horsepower using three different qualities of propane refrigerant.
Define technically feasible process alternatives and develop a preliminary FEL-1 level design for a process to purify a newly available dirty hydrogen stream and recycle it back into the client's refinery operations.
Develop and teach a course on advanced process simulation techniques using CHEMCAD, MS Excel, and Visual Basic programming. Learn more...
Provide on-site chemical engineering support to an engineering firm with limited process engineering resources for a variety of different projects.
Perform a series of process simulation case studies of various coal fired power cycles for a power industry electric utilities research group.
Provide an independent chemical engineering peer review of a novel heat cycle developed by a licensed technology provider.
Provide process engineering and CAD technician services to generate 'as-built' drawings for a new compressed hydrogen gas storage and truck loading system.
Evaluate an existing but non-commissioned vapor recovery unit for both operability and safety issues at a crude oil terminal facility.
Engineering support for various operations associated with anhydrous ammonia (NH3NH3) pipeline systems which include transport lines, booster stations, hot and cold (cryogenic) storage facilities and terminal flare systems.
Perform site inspections, calculations, and process modeling to evaluate multiple cold ammonia storage facility flare systems, estimate releases, and provide improvement recommendations.
Evaluate the existing controls on a chlor-alkali hydrogen system at a plastics manufacturing facility and seek to identify improvement opportunities.
Lead the process design package development effort for the finishing section of a Gas-Phase Polyethylene Plant.
Evaluate the an existing lube-oil filtration system for the Fluid Catalytic Cracking (FCC) Unit Wet Gas Compressors and provide recommendations for improving filtering efficiency and operability.
Perform process safety and risk management Process Hazards Analysis (PHA) meetings to mitigate the possibility of accidents or releases.
Identify and document refinery-wide flare loading scenarios.
Design of an Air Blower system to convey coke from a petroleum refinery Coker unit.
Provide a wide variety of on-site process engineering support for a major global refiner.
Evaluate a refinery wide cooling water system in a challenging desert like environment to identify areas for improvement and recommend corrective measures.
Provide on-site staff augmentation project engineering support at a nuclear materials processing facility.
Perform preliminary process design, cost estimating, and vendor identification for a novel clay to aluminum metal production process.
Provide process engineering support for the design of the balance of plant (BOP) systems for a new specialty steel production plant.
Project to reduce contaminant levels in the production of a food grade bleach organic peroxide.
Perform relief valve sizing for a compression system used in fertilizer manufacturing.