Currently Showing: All Projects

Process design of a new plant wastewater treatment system designed to meet specific discharge permit standards.
Provide a wide variety of on-site process engineering support for a major global refiner.
Provide process engineering assistance for various utilities and control systems as part of a health products plant restart project.
Provide process engineering support to improve the product quality for a benzoic acid manufacturing facility in Europe.
Provide troubleshooting and detailed column internals analysis for a poor performing fluid catalytic cracking main fractionator at a major U.S. petroleum refinery.
Evaluate and make recommendations to correct unacceptable effluent suspended solids and fecal coliform concentrations from an extended aeration activated-sludge waste water treatment system at a golf club.
Provide process engineering assistance with the Maintenance, Startup, & Shutdown (MSS) emission calculations for the air permit application of a new gasification plant using state and EPA methodologies.
Provide process engineering technical guidance to help develop a project for producing product quality hydrocarbons from a municipal solid waste (MSW) syngas, as well as performing process alternatives technical and economic evaluations.
Provide process engineering technical guidance to help develop a project for producing product quality hydrocarbons from a municipal solid waste (MSW) syngas, as well as performing process alternatives technical and economic evaluations.
Provide on-site process engineering support to help identify and implement a variety of process improvements at a batch specialty chemical plant.
On-site process design and engineering support for the complete design, pilot plant program, startup, and commissioning of a new wastewater treatment facility.
Develop a plant water balance followed by a technical and economic process alternatives study to provide recommendations for upgrading/replacing an aging industrial waste water treatment system at a specialty metal alloy manufacturing facility.
Perform regulatory compliance audits at multiple petroleum refineries to comply with OSHA Process Safety Management of Highly Hazardous Chemicals and EPA Risk Management Program regulations.
Perform a detailed engineering assessment of a vent system design at a facility to size-reduce dry active waste (DAW) via a semi-automated shredding and baling system.
Perform process alternative evaluations and develop an FEL-1 level process design and cost estimate information to achieve a 40% increase in wastewater treatment capacity at a chemical manufacturing facility.
Provide process design and engineering services for a pilot-scale sugar cane to ethanol production facility by designing an ethanol purification system, developing upgrades for an existing lime slurry neutralization system, and generating a plant-wide mass balance and accompanying PFDs.
Provided technical assistance in the operation of a diphenyl ethane (DPE) production unit and helped identify process improvement upgrades for three independent solvent recovery units to meet production throughput needs.